When you connect your device remotely and set up the race, the filters that you have created in Sportmaniacs will be applied. You will only be able to edit them during this configuration. Filters that you have created in local mode do not apply while a race configuration is active. We tell you all about creating filters in Sportmaniacs in this article.
The tag filtering feature is not activated by default on timingsense devices. If you want to activate it please contact us: info@timingsense.com
You can disable a specific filters or disable them all in batches from the “Active Filters” screen.
- Open the menu.
- Select “Filters”.
- Select “Show active filters” at the bottom right
-
- To disable a particular filter, click on the cross to the right of the filter.
- To disable all filters, click “Remove all” in the bottom left.
-
- Click “Yes” in the pop-up window.
The filters you have disabled will disappear from the “Active chip filters” screen. On the “Chip filter statistics” screen, the status indicator for these filters will be orange.
Readings that do not match the active filters will not be sent to TSCloud but will remain stored on the box. You can retrieve them by applying the correct filters and rewinding the device from TSConnector; or by downloading the session to a USB from the “Previous Sessions” section.