Once the antennas have been placed at the timing point, they need to be connected to the box. The cable sets come with one cable for each length, according to the distance of the box from the antennas. Open the cover of the cable guide and connect the cables to the antennas in order of […]
The Bowie Card is a field device used for checking the UHF power emitted from the antennas. Use it before a race to be sure you have sufficient power to read all of the participants tags correctly. Hold the card with your thumb on the fingerprint icon in the corner of the card. Hold it […]
Lateral antennas are made up of two components; a tripod and an antenna. To mount it, open the tripod and adjust the height so that it is approximately at the height that the tag will be as the runners go past. Once at the correct height, fit the antenna using the top ring of the […]
To time correctly using the Multisport tag, be sure that the athletes place their tags according to the following instructions. The velcro with the tag should be placed 1 or 2 centimeters above the ankle. The velcro should be wrapped around the leg as close to the foot as possible and never above the knee. […]
The reusable Clip tag can be placed and replaced without the need to undo the shoelaces. Athletes should place the tag according to the following instructions. Lift the flange of the Clip. Open it slightly and pass it beneath the shoelaces. Press down firmly to close the flange. As shown in the image, the number […]
